Proline Promag W 10 electromagnetic flowmeter (2024)

FAQs

What is the price of Endress Hauser Promag 10? ›

Endress+Hauser Proline Promag W 10 electromagnetic flowmeter, For Industrial at Rs 23000/piece in Chennai.

Mag flow meters do not have any moving parts, so there is minimal need for maintenance or replacement. Accuracy over a wide flow range can be as good as ± 0.5% of flow rate or better.

Ultrasonic flow meters handle a wide variety of fluid types, including those with high particulate or gaseous content. Meanwhile, magnetic flow meters work best with conductive liquids, including corrosive or abrasive ones. They are ideal for industrial contexts but have limited use.

Electromagnetic flow meters (or magmeters) are a type of velocity or volumetric flow meter that operate pursuant to Faraday's law of electromagnetic induction – which states that a voltage will be induced when a conductor moves through a magnetic field. Magmeters can detect the flow rate of conductive fluids only.

It works up to a pressure range of 16 bar and with a measurement accuracy of ± 0.5 %. The 4" diameter ANSI B16.

The standard maximum measured error is ±0.5 % of reading ± 1 mm/s and the Proline Promag W 400 offers an improved accuracy of ±0.2 % of reading ± 2 mm/s.

Mag meters create a magnetic field and measure the voltage of any conductive material passing through the field. The major downside to this technology is that it requires liquids with specific properties or impurities.

Considering that magnetic flow meters have no moving parts, they require minimal maintenance. Their average life service is 30 years and you may have to clean the electrodes based on the water quality, fluid media, and the manufacturer's recommendations.

One common problem with magnetic flow meters is the occurrence of low or erratic flow readings. This issue may be caused by air bubbles or solid debris obstructing the flow sensor. To troubleshoot this problem, start by inspecting the installation for any misalignment or incorrect positioning of the meter.

Coriolis meters are generally considered the most repeatably accurate flow meters available today. Coriolis meters are ideal for any application where high accuracy is a key factor for consistent product quality, safety and revenue.

Which is better magnetic flow meter or mechanical flow meter? ›

Traditional mechanical flow meters, such as turbine or paddlewheel meters, introduce pressure losses due to the obstruction they create in the fluid path. In contrast, magnetic flow meters have no moving parts, eliminating any pressure loss.

Answer and Explanation:

Ultrasonic waves are special sound waves whose frequency range is beyond the range detectable by the human ear. Since all sound waves aren't electromagnetic waves, ultrasound waves are NOT electromagnetic waves.

In Line Magmeters

The in line type magnetic flow meters offer a higher accuracy. They can be as accurate as 0.5% of the flow rate. The insertion styles offer a 0.5 to 1% accuracy.

Importance of Magnetic Flow meter Grounding

The induction signal of the magnetic flowmeter itself is very weak and is easily affected by noise. Therefore, it requires a reliable grounding, otherwise interference current will be generated.

Measurement Principle: As mentioned above, mass flow meters measure the mass of the fluid in order to determine the flow rate. While magnetic flow meters use magnetic fields to measure the flow of conductive fluids. Accuracy: Both mass flow meters and magnetic flow meters are known for their accuracy.

Endress Hauser Proline Promass F 300 Coriolis Flow Meter, Water at Rs 45000/piece in Rajkot.

The E+H Proline Promag P 300 electromagnetic flow meter can measure flow from 1 gal/min up to 44,000 gal/min and is available with a PFA or PTFE liner. The PFA liner can handle application media from -4 to 302°F (standard) or 356°F (high-temperature option) and the PTFE liner offers a temperature range of -40 to 266°F.