Ask our experts a question about this part and we'll get back to you as soon as possible!
85 questions answered by our experts.
Sort by:
- < Prev
- 1
- 2
- 3
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Arnie
October 26, 2017
I removed the drain pump motor assuming is was bad because of an oe error code and no obvious blockage. How can i be sure of the exact replacement part, it looks the same. And what about these after market parts; 1/3 the price. My washer has 2 pumps i focused on the drain motor, assuming the other would be ok. Any thoughts?
For model number WM0742HWA
Hi Arnie,Thank you for your question. There are three causes for the OE error code on your machine. Either there are blockages in your drain pump, your drain filter is clogged, or your drain hose is bent/blocked. I would suggest you check both your filter and hoses as well. I would not be able to comment on after market parts because we only deal in OEM parts. The second pump is just your circulation pump and does not have anything to do with your draining. It just makes sure that any suds inside of the drain tube leading from your drum get's cycled back into the cleaning process. I hope that helps. Good luck with your repair.
192 people found this helpful.
Was this helpful?
Thank you for voting!
Sofia
August 22, 2017
I've replaced the drain pump, just about a year ago. Now... same thing washer will drain / but will not spin out. what is the difference between 4681ea2001n and 4681ea2001t ? i do not recall the model # that i ordered... my washer is LG, from approximately 2005. how do i know that i did in fact get the correct part? and... going forward (since, evidently, im gonna need yet another one...) what model # do i order? wm.0642.hw / LG washer / approx purchase date 2005. thanks very much. will await your response before i order again!
For model number WM0642HW
Hi Sofia,Thank you for your inquiry. The manufacturer has replaced part number 4681EA2001N with part number 4681EA2001T. Part number 4681EA2001T is listed under the model number you provided, WM0642HW. If this is the correct model number from your appliance than you ordered the correct part. If you ordered the part from us within the last 12 months we can enter a refund under warranty for you and reorder the part. I hope this helps. Thank you and have a great day!
47 people found this helpful.
Was this helpful?
Thank you for voting!
Mario
December 12, 2018
Does this water pump work for my LG model, after trying to wash with my washer, the washer stops when spinning at around 7 minutes and shows oe. The water stays inside my washer and i’ve already checked the filter and everything seems fine. Also i hear a sound at the bottom of the washer before it stops.
For model number WM3370HWA
Hello Mario, thank you for your question. OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter. If those have been checked you will want to replace the drain pump part number PartSelect Number PS3579318. Good luck with your repair!
34 people found this helpful.
Was this helpful?
Thank you for voting!
Chad H.
January 16, 2019
Apparently i need to replace the drain pump motor, so i have watched the video to see exactly what i am getting into with this repair. Since i will have to open her up to do the job, is there any other parts you would suggest replacing in the spirit of keeping good maintenance on the machine... kind of like a tune-up package? i was thinking about the door boot, mine is kind of moldy but works just fine. any thoughts?
For model number WM2075CW
Hello Chad, Thank you for the question. We do not carry a kit sorry but you can check the springs for the drum, Part Number: PS3524574, the gasket Part Number: PS3522859, Shocks Part Number: PS3522309 and the door gasket Part Number: PS3524977 as these are the most commonly sold part due to wear. Hope this helps!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Door Gasket
$98.52
In Stock
Shock Absorber Assembly
$29.48
No Longer Available
Gasket
Spring,Hinge
$29.03
In Stock
Peter
January 2, 2018
We had an error code come up saying that the drain screen ro drain hose may be blocked. We have had this before and it was no big deal to clear the screen. However, this time, the screen was clean and rather than removing the drain hose, thought to blow it out to see if there was a blockage. Nothing blocking, air passed through fine. Put the machine back together, ran a rinse and spin cycle and it performed fine. Ran the next load of laundry and it again came up with a code saying it could not drain again. ***note, the drain motor was pretty loud while running after i had already drained the tub when checking for blockages. Possibly because there was no water to pump? Not sure where to go from here.....new pump? your advice would be greatly appreciated.
For model number WM2688HNM
Hello Peter, Thank you for your inquiry. I would advise checking the drain pump to see if it has any clogs and test it with a multimeter to see if it has continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Donovan
April 13, 2018
My LG washer will leak water on to the floor anytime we do a light load of cloths. There is no apparent leaking while doing medium or heavy loads. The puddle of water forms under the area where the drain pump/filter is located.
For model number WM2301HW
Hello Donovan, thank you for your question. If the unit is leaking around the drain pump/filter area, we would recommend checking the filter to be sure its not clogged, as well as the hoses that lead to and from the drain pump. with the access panel removed, run a small load and watch to see if you can notice exactly where the leak is coming from. It might be from a hose, or the drain pump itself. If those parts are not leaking, check to see if the water is leaking down from the dispenser or the water valve and dripping down to the bottom of the unit. I hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Gert
November 6, 2018
Further question. I started the washer as you suggested, pulled the plug and the water stopped coming in. Not clear from your previous response if this means a defective water inlet valve (hot or cold, response is the same). Or if it is the pressure switch. Thanks
For model number MW2016CW
Hello Gert, thank you for your question. If the water stopped coming in when power was removed from the unit the valves are working. I would recommend testing/replacing the pressure switch and the pressure hose.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
January 30, 2018
We need to replace the drain pump on our washer but aren't sure of the part number. Will the part # ps3579318 work or not? Every time i start to order it a message comes up that it may not fit, i don't want to order it and it not be correct. With 4 kids i really need my washer... now.
For model number WM3570HVA
Hello Mary, Thank you for your inquiry. Yes, we do show that this is the drain pump that will fit on the model number you provided. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Joy
February 19, 2020
In need of replacing the pump on my LG washing machineI am including the serial number on this message 205kwel49044Model number wm2655hvaI hope this helps in locating the correct pump Thank you in advance
For model number WM2655HVA
Hello and thank you for writing.Drain pump and motor assembly PS3579318 is in the list of compatible parts for your model number. We hope this helps. Please contact us anytime if you require further assistance.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Cuata
November 19, 2017
Washer is not going through the rinse cycle
For model number WM245tH
Hi Cuata, Thank you for the question. If the washer is not going through the cycles you will need to replace the Timer Switch. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, and resubmit the question and we will be happy to locate the part needed. Look forward to hearing from you!
5 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >